Ubiquiti-networks UniF AP AC Manual de usuario

Enterprise WiFi SystemModel: UAP-AC

4. Secure the Mounting Bracket to the ceiling tile using the Ceiling Backing Plate, Flat Head Screws, and Keps Nuts. Then feed the Ethernet cable thr

5. Set the ceiling tile back into place.6. Connect the Ethernet cable to the Main port.MAINSECONDARY7. Align the slots on the UniFi AP with the tab

8. Slide the UniFi AP down until it locks into place.Powering the UniFi APThe UniFi AP can be powered directly by a compatible PoE+ switch or with th

Connecting to the PoE Adapter1. Connect the other end of the Ethernet cable coming from the Main port on the UniFi AP to the Ethernet port labeled PO

Software InstallationDownload and install the latest version of the UniFi Controller software at: downloads.ubnt.com/unifiLaunch the software and foll

SpecificationsUniFi AP-AC (UAP-AC)Dimensions 200 x 204 x 27 mm(7.87 x 8.03 x 1.06")Weight 508 g (566 g with Mounting Kits)1.12 lb (1.25 lb with M

Safety Notices1. Read, follow, and keep these instructions.2. Heed all warnings.3. Only use attachments/accessories specified by the manufacturer.W

Limited WarrantyUBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from de

DisclaimerEXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE

NoteSome countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You

IntroductionThank you for purchasing the Ubiquiti Networks® UniFi® Enterprise WiFi System. This system includes the UniFi Controller software, which a

Industry CanadaCAN ICES-3(B)/NMB-3(B)To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the

CE MarkingCE marking on this product represents the product is in compliance with all directives that are applicable to it.Alert Sign (!) Follows CE M

EspañolLa Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junt

Declaration of ConformityČesky [Czech]UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal

Italiano [Italian]Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS device, è conforme ai requisiti essenziali ed alle altre dis

System Requirements• Microsoft Windows 7/8, MacOSX, or Linux• Java Runtime Environment 1.6 (or above)• Web Browser: Mozilla Firefox, Google Chrom

Hardware OverviewLEDLED Color StatusWhiteFactory default, waiting to be integrated.Flashing WhiteInitializing. Alternating White/BlueDevice is busy; d

PortsMAIN SECONDARYResetMain PortSecondary Port Reset ButtonCable Feed PlugLocking NotchLocking ClipMounting BracketMain The Main port is a Gigabit E

Hardware InstallationThe UniFi AP can be mounted on the wall or ceiling. Perform the steps for the appropriate installation:Wall Mount1. Position the

4. Insert the Screw Anchors into the 6 mm holes. Secure the Mounting Bracket to the wall by inserting the Screws into the anchors.5. Connect the Eth

6. Align the slots on the UniFi AP with the tabs on the Mounting Bracket.7. Slide the UniFi AP down until it locks into place.

Ceiling Mount1. Remove the ceiling tile.2. Place the Ceiling Backing Plate in the center of the ceiling tile. Mark the four mounting screw holes and