Ubiquiti Networks LiteStation2 Guía de usuario descargar pdf (Pagina 5)

IP Address: enter IP address for subscriber station

LiteStation2/LiteStation5.

Netmask: enter a subnet mask for subscriber station

LiteStation2/LiteStation5.

Gateway IP: enter a gateway IP address for subscriber station

LiteStation2/LiteStation5.

Step 3 Assign an ESSID to subscriber station

Use Link Setup menu to specify the ESSID of the wireless device to

which the subscriber station will be associated:

ESSID: specify the ESSID of the wireless network device which the

LiteStation2/LiteStation5 will associate to.

Refer to the section Basic Wireless Settings for detailed information.

Step 4 Specify the IEEE 802.11 mode

Specify the 802.11 wireless network mode by which the subscriber

station will communicate with the wireless device:

Be sure, that chosen IEEE

802.11 mode is the same as

configured on the wireless

device.

IEEE 802.11 Mode: select the IEEE 802.11 mode of your wireless

network.

B only – connect to a 802.11b only network.

B/G Mixed – connect to a 802.11b/g network.

G only – connect to a 802.11g only network.

G Dynamic Turbo – connect to a 802.11g network using SuperG.

For LiteStation5 model this screen shot will differ, choose the

following options:

A – allows connection to 802.11a networks.

A Static Turbo – allows connection to 802.11a networks that

1 2 3 4 5 6 7 8 9 10 ... 17 18

Sin comentarios

Ubiquiti Networks LiteStation2 Guía de usuario Pagina 5