Ubiquiti Networks NanoStation Guía de usuario descargar pdf (Pagina 5)

Hardware Overview

LEDs

LAN2LAN1

Power The Power LED will light green when the

device is connected to a power source.

LAN1 WAN/Main Ethernet The LAN1 Ethernet LED

will light steady green when an active Ethernet

connection is made to the Primary Ethernet Port and

flash when there is activity.

LAN2

LAN/Secondary Ethernet (NanoStation M2/M3/M5

only) The LAN2 Ethernet LED will light steady green

when an active Ethernet connection is made to

the Secondary Ethernet Port and flash when there

isactivity.

Signal In airOS, you can modify the wireless signal

strength threshold values for each LED on the

Advanced tab under Signal LED Thresholds. The

default values are shown below:

LED will light red when the wireless signal

strength is above -94 dBm.

LED will light amber when the wireless signal

strength is above -80 dBm.

LED will light green when the wireless signal

strength is above -73 dBm.

LED will light green when the wireless signal

strength is above -65 dBm.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Sin comentarios

Ubiquiti Networks NanoStation Guía de usuario Pagina 5