Ubiquiti Networks PBE-M5-400 Guía de usuario

High-Performance Integrated InnerFeed™ airMAX® BridgeModels: PBE-M2-400, PBE-M5-400

9. Connect the other end of the Ethernet cable from the PowerBeam to the Ethernet port labeled POE on the PoEAdapter.10. Connect an Ethernet cable f

Accessing airOSVerify connectivity in the airOS Configuration Interface. 1. Make sure that your host machine is connected via Ethernet to the PowerBe

5. Select the PowerBeam Dish Reflector size:a. Click the Wireless tab.b. From the Antenna drop-down list, select the appropriate option.c. Click C

Installer Compliance ResponsibilityDevices must be professionally installed and it is the professional installer's responsibility to make sure th

SpecificationsPowerBeamDimensionsPBE-M2-400PBE-M5-400420 x 420 x 289 mm(16.54 x 16.54 x 11.38")420 x 420 x 275 mm(16.54 x 16.54 x 10.83")Wei

Safety Notices1. Read, follow, and keep these instructions.2. Heed all warnings.3. Only use attachments/accessories specified by the manufacturer.W

Limited WarrantyUBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from de

DisclaimerEXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE

NoteSome countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You

Industry CanadaThis Class B digital apparatus complies with Canadian CAN ICES-3(B).To reduce potential radio interference to other users, the antenna

IntroductionThank you for purchasing the Ubiquiti Networks® PowerBeam™. This Quick Start Guide is designed to guide you through the installation, and

RoHS/WEEE Compliance StatementEnglishEuropean Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging

EspañolLa Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junt

Declaration of ConformityČesky [Czech]UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal

Italiano [Italian]Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS device, è conforme ai requisiti essenziali ed alle altre dis

www.ubnt.com©2012-2014 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, airMAX,

Hardware OverviewBottom ViewCable DoorRear HousingTechnologyEthernet PortRelease Button SlotDish BracketRelease ButtonDish ReflectorAlignment PinsRese

Release Button After you assemble the PowerBeam, check the Release button; it should be fully engaged in the Release Button Slot of the Rear Housing.

Application ExamplesThe PowerBeam mounted outdoors with the Dish Reflector installed provides directional outdoor coverage (gain is reflector-dependen

InstallationThe installation instructions show the PowerBeamM2; however, the same instructions apply to the PowerBeamM5. 1. Align and insert the tabs

3. Push in the sides of the Cable Door and detach it from the Rear Housing.20100104. Attach the Antenna Feed:a. Insert the Antenna Feed into the Re

5. Connect the Ethernet cable:a. Connect an Ethernet cable to the Ethernet Port of the Antenna Feed. b. Re-attach the Cable Door to the Rear Housin

7. Insert the U-Bolt into the Pole Clamp and Dish Bracket. Secure each end of the U-Bolt with a Flange Nut.201010025 N-mNote: The mounting assembly c